Montage
Hook fastening
This bracket is characterized by a very simple structure. It fixes the wall decoration at a distance of approx. 25 mm from the wall. It is made entirely of stainless steel and is therefore suitable for all materials, both indoors and outdoors.
Two screw hooks supplied are fixed to the wall with dowels. The distance between the two upper brackets is measured on the back of the wall decoration beforehand. It is important that the two holes are aligned precisely in height using a spirit level - this means that the whole thing will then hang on the wall facing north. The screw hooks are screwed in as far as they will go and the wall decoration is hung - done. The additional brackets attached to the wall decoration ensure that the distance from the wall is the same everywhere - but they do not need to be attached.
Threaded fastening
This bracket has a diameter of just 12 mm and therefore looks very delicate. The wall decoration is fixed at a distance of approx. 25 mm from the wall. It is made entirely of stainless steel and is therefore suitable for all materials, both indoors and outdoors.
Depending on the geometry, the two upper fastening points can be used for alignment with a spirit level. However, this is not possible for all components. To mark the drill holes, the fastening bolts have small tips that you can simply press into the wall. This marks the drilling positions for the dowels. The brackets are fixed to the wall with the screws and dowels provided. Make sure that the small grub screws point towards the edge of the component so that you can reach them later. After attaching the product, the product is then inserted into the brackets with the welded-on bolts. You can then tighten the small grub screws from the side using the Allen key provided to fix the image in place.
